Hinge RC HDG
- Dimensions
- 150 × 97 × 50 mm
- Net weight
- 0.8 kg
Welded mesh

The details that complete the opening
Hinges, closing parts and the finishing connections.
Choose every detail around the gate.
A place for every fitting
Find the part by its position. Then review its dimensions and the connection to your gate.
The hinge collection
Three hinge references. Compare the product dimensions before matching the connection to the frame.
Welded mesh
Welded mesh / Steel hoarding
Steel hoarding
Hoarding hinge reference shared by GH02 / GH03. Confirm the model-specific drawing.
Dimensions are product record values. Images are not to a common scale. The gate frame, hinge interface and final supply contents need to be matched to the selected model.
Closing & positioning
Identify the closing connection and the lower positioning point as separate items in your gate schedule.
Match the bracket to the meeting edge of the gate. Identify the intended locking method and any existing fittings.
Locate the bolt and receiving point. Include the clearance below the gate and the required open or closed position.
List the bracket, bolt, receiver and locking device separately. The catalogue reference does not establish that every mating part is included.
Check the interfacesThe moving edge
A wheel is specified with its gate. Bring the frame, attachment and running surface into the same review.
Listed with welded mesh and hoarding. Product weight is not a load capacity.

Check the wheel at the frame
and along the full travel.
Along the fence line
Panel-retention fittings, two top-bracket versions and the ties used for screen fixing.
Panel retention
Standard panel version
Round-corner panel version
Y brackets are for a separately specified wire arrangement. Match the panel-top interface and itemise any wire and additional fixings in the supply scope.
Screen & cover fixing · KC-TF-AC-TI01
For the screen-fixing schedule. Coordinate the eyelets, fixing pattern and pack quantity.
Interfaces & system relationships
Use the listed series as a starting point. The final fit depends on the model and its connection dimensions.
Swipe across to view the full relationship table.
| Fitting | Welded mesh | Steel hoarding | Printed screens | Interface to review |
|---|---|---|---|---|
| GH01Hinge RC HDG | Listed | Not listed | Not listed | Frame section & hinge attachment |
| GH02Gate Hinge 200 | Listed | Listed | Not listed | Mounting plate & connection centres |
| GH03Gate Hinge 154 | Not listed | Listed | Not listed | Hoarding frame & hinge interface |
| GH04Lock Bracket HDG | Listed | Not listed | Not listed | Closing gap & locking interface |
| GH05Drop Bolt HDG | Listed | Not listed | Not listed | Gate clearance & receiving point |
| GH06Gate Wheel Ø160 | Listed | Listed | Not listed | Mounting interface & running surface |
| SF01Anti-Lift Bracket HDG | Listed | Listed | Not listed | Panel, foot & bracket connection |
| SF02Y Bracket V1 | Listed | Not listed | Not listed | Panel top & wire arrangement |
| SF03Y Bracket V2 (RC) | Listed | Not listed | Not listed | Round-corner frame & top attachment |
| TI01UV Nylon Cable Ties 8 in | Not listed | Not listed | Listed | Eyelets, fixing pattern & pack quantity |
Listed means a catalogue relationship, not universal compatibility. Not listed means that the supplied range record does not state the relationship.
Your connection details
Keep the interface information with your selected fittings.
Explore complete gatesFrom selection to specification
Request mounting dimensions and the connection detail for the chosen models.
List included pieces, separate mating parts and packing requirements.
Before the order
Answers to the details that matter when matching small parts to a complete gate.
Ask about your fittingsStart with the gate and supporting frame, then compare the listed dimensions and mounting arrangement. GH01 and GH02 are listed with welded mesh; GH02 and GH03 with hoarding. These relationships do not guarantee a fit to every model. Request the interface drawing for your gate.
The range record gives a 160 mm diameter, 40 mm width and 1.2 kg net weight. It does not specify a verified wheel load. Provide the gate dimensions, mass, fixing position and running surface so the required wheel can be reviewed.
This range lists a lock bracket and a drop bolt. Do not assume a padlock, receiver, gate frame or all fasteners are included. Ask for an itemised supply list stating each included and separately supplied part.
V1 and V2 (RC) are distinct versions. The range identifies V2 with round-corner panels. Provide the panel model and top-frame detail before confirming the bracket and any wire arrangement.
Include a gate photograph, frame section, hole centres, connection details and the existing hardware references. The team can use these to review the proposed parts; a series name alone is not enough to establish compatibility.
TI01 is listed as 8-inch UV nylon cable ties, packed 100 per bag. Choose the number of bags. The range also carries a 50 lb label without a verified test basis; it is not a wind rating or a load rating for a complete screened fence.
Your hardware enquiry
Request an interface review, an itemised supply list and a quotation. Prepare here, then send from your email app.
Select fittings above, or describe the parts you need in your requirements.
Gate Hardware & Security Fittings