Coupler 3 mm
Formed panel coupler
- Listed dimensions
- 130 × 70 × 54 mm
- Unit net weight
- 0.3 kg
- Listed for
- Mesh & hoarding

The connection between panels
The small detail.
The whole fence line.
Panel connections and chain link clamp kits.
Choose the profile. Check the frame. Define the contents.
Two connection families
Different panel structures call for different connection details.
The panel coupler collection
Look at the formed surfaces together, then compare the recorded dimensions and select your quantities.
Formed panel coupler
Ribbed panel coupler
Low-profile model
Model names are not tube diameters. Dimensions and unit weights shown above are the recorded product values; photographs are not to scale.
Check your frame fitChain link connections
Review the assembled reference and the separate hardware record before finalising the supply list.
KC-TF-AC-CP04
Galvanised steel saddle clamp kit for the chain link panel range.
KC-TF-AC-CP05 · contents to clarify
Listed contents
The reference photo shows one bolt and nut pair. Confirm final pack contents and whether this record is included in CP04 before ordering separately.
These are separate product records. The images are not verified assembled and disassembled views of one identical kit.
Keep the supply scope togetherThe frame-to-clamp interface
Check the frame section, the formed profile and the fastening arrangement as one connection.
PRODUCT DETAIL / PANEL COUPLERFrame & bearing surface
Record the outside diameter or section of both adjacent uprights, together with the gap between them. Include a clear photograph of the joint.
These details will travel with your enquiry.
The system relationship
Use the product family as a starting point. Check the exact frame interface before specifying a model.
| Connection model | Welded mesh | Steel hoarding | Chain link |
|---|---|---|---|
| CP01Coupler 3 mm | Listed for | Listed for | Not listed |
| CP02Coupler 1.7 mm | Listed for | Listed for | Not listed |
| CP03Coupler 2.5 mm Low | Listed for | Listed for | Not listed |
| CP04Chain Link Panel Clamp Kit | Not listed | Not listed | Listed for |
| CP05Chain Link Connector Hardware Set | Not listed | Not listed | Review required |
“Not listed” means this relationship is not stated in the supplied range data. It does not establish incompatibility.
At the panel joint
A connector is one part of the complete fence assembly. Keep its position and surrounding components in the installation review.

Mark adjacent uprights, corners and openings on the fence layout. Obtain the connector locations and quantities for the selected panel system.
Technical resources

Frame section, outside diameter, clamp profile and fasteners.
Model drawing · on request
Ask for the clamp profile, frame contact dimensions and fastener information for your selected model.
Supply schedule · on request
List clamps and loose hardware together. Identify included parts and any separate spare components.
Before you specify
The details that help turn a component reference into a complete order.
Start with the frame outside diameter or section, the gap between adjacent uprights and photographs of the existing connection. A listing for a fence family does not establish compatibility with every panel in that family. Request the model drawing before specifying a replacement.
The model names identify 3 mm, 1.7 mm and 2.5 mm Low variants. Their reference images show different formed profiles. CP01 and CP03 share the listed 130 × 70 × 54 mm dimensions; CP02 lists 121 × 56 mm. All three have a listed unit weight of 0.3 kg. These figures do not establish a strength ranking or a compatible tube diameter.
CP04 is listed as a saddle clamp kit. The CP05 hardware record lists two clamp brackets, two carriage bolts and two hex nuts, but its relationship to CP04 still needs clarification. Ask for the final itemised pack contents so the same hardware is not ordered twice.
Send the panel layout, joint positions and any corners or openings. The required number and location of connectors depend on the chosen system and its installation details. Include spare-part requirements separately; this page does not apply a universal quantity per joint.
Include your required finish, bolt specification and installation document requirements in the brief. Available options and the final specification need to be confirmed for the selected model. No coating thickness, bolt grade or tightening torque is stated here.
Your connection schedule
Request a model and interface review, itemised contents and a quotation for the quantities and destination you provide.
Choose a model above, or describe the connection you need below.
Fence Couplers & Clamps